Best Ultrasonic Gun Cleaning Solution

It’s all good having a high quality gun, but you want it to last, right?

To make it last, it’s a good idea to make sure that you maintain your gun properly. 

An ultrasonic gun cleaning solution is very helpful for ensuring that your gun is maintained well, so long as you are using it properly.

There are a lot of great ultrasonic gun cleaning solutions on the market - the only question is, what is the best one for you?

There are so many options that it can be difficult to figure that out. We’re here to help.

Here are some of the best ultrasonic cleaning solutions on the market. We’ve also written a handy buyer’s guide to help you to narrow down your decision.

Top 5 Best Ultrasonic Gun Cleaning Solutions

OUR TOP PICK

This ultrasonic gun cleaning solution is ideal if you need to clean brass cases and various other gun parts right at home.

You can use it effectively with the Frankford Arsenal Ultrasonic cleaner and rotary tumbler. 

All you need to do to use this ultrasonic gun cleaning solution is mix together some water and some solution in a ratio of 40:11. This will help you to get rid of any carbon build up or any stains on the gun parts in no time at all.

In fact, you can use the solution for a number of cleaning cycles without changing it every single time. 

In addition to this, if you have any questions the Frankford customer service team is very responsive. You can find any extra information you may need right there on the company’s website.

The solution comes in a 30 ounce bottle that’s around 10 inches tall. Some users have stated that the solution is a little expensive, however, so this is something that you should bear in mind.

Pros

  • Easy to use
  • Effective
  • Responsive customer service

Cons

  • Expensive 

EDITORS CHOICE

If you are looking for a highly effective ultrasonic gun cleaning solution, you really can’t go wrong with the iSonic Ultrasonic Brass Cleaning Solution.

This is a very safe cleaning solution that is ideal for making sure that your guns are looking almost like brand new without experiencing any damage. 

The cleaning solution does a great job of cleaning the carbon residues and oxidation from brass case surfaces. It’s even possible to dilute the concentrated solution using tap water from 1:20 to 1:40 ratio.

It ultimately depends on your personal requirements. The best thing is that one mere bottle of this cleaning solution can create from 5 to 10 gallons of solution.

With this solution you can clean any brass in no time at all. All you need to do is follow the instructions on the bottle for a flawless cleaning experience.

Some users have states that you will need to clean it a number of times in the ultrasonic cleaner though. 

Pros

  • Provides a lot of solution
  • Cleans quickly
  • Easy to follow instructions
  • Safe for brass elements of your firearm

Cons

  • Users have stated that you need to run your firearm through solution several times before seeing thorough cleaning results

BEST VALUE

You can expect squeaky clean gun parts in no time at all when you use the Lyman Turbo Sonic Cleaning Solution! This ultrasonic gun cleaning solution makes cleaning your firearm easier than ever.

Nobody wants to be spending copious amounts of hours cleaning their precious gun parts, right? That time that you spend cleaning could be otherwise spent out on the shooting range or out in the field hunting.

Thankfully, with this USA made product, you will get incredibly efficient cleaning in a very short amount of time. It also required minimal effort to clean with this solution too.

The formula has been designed to thoroughly clean every single part of the gun, including the steel and stainless steel parts. It will remove any oil, dirt, carbon buildup and powder residue in a flash.

You can also use it to deep clean your gun parts, including your cylinders, bolts, sliders, and any other steel pieces such as mold Block and reloading dies. You aren’t restricted to only using this cleaning solution in Lyman ultrasonic cleaners either.

You can use the solution in pretty much any other ultrasonic cleaning machine on the market too. Some users have reported that you may need to play around with the water to solution ratio though.

Pros

  • Quick acting
  • Deep cleans gun parts
  • Easy to use

Cons

  • Some users have said that the advertized water to solution ratio may not work as well, so you may need to experiment

RUNNER UP

There are a lot of things to love about the Lucas Oil Extreme Duty Bore Solvent and Ultrasonic Gun Cleaner. The product has been recommended by a number of huge firearm manufacturers just to begin with. 

The gun cleaning solution is designed to get rid of any old grease and oils from your gun. You ccan even use it on polymers and any factory applied firearm finishes.

One issue you may find with ultrasonic gun cleaning solutions is that they can emit a bit of an odor. You do not need to worry about that with the Lucas Oil Extreme Duty Bore Solvent and Ultrasonic gun cleaner.

With this nifty product, you will only smell a faint scent of grape. There’s no ammonia or kerosene in it either. You can even use it with a range of different ultrasonic cleaners.

Once you have used the solution, all you need to do is remove the parts of the firearm, and let it drip dry. You just need to reassemble your gun from there.

It’s even safe from any corrosion both inside and out of the gun. The perfect way to give your gun some TLC!

Pros

  • Not a strong scent
  • Recommended by a range of big firearm manufacturers
  • Does not contain ammonia or kerosene

Cons

  • None

RUNNER UP

The Hornady One Shot Sonic Clean Solution is a popular ultrasonic gun cleaning solution among many firearm enthusiasts. You can use this solution with a range of different gun cleaners, not only the Hornady models. 

With the Hornady Ultrasonic Cleaner solution, you can get rid of any dirt, grime, grease or carbon from your guns in no time at all. The solution has even been designed to get rid of any powder residues.

Is that all? No way! You can expect your firearm to look as good as new once you’ve used this ultrasonic gun cleaning solution. 

You can get this gun cleaning solution in a 32 ounce bottle. It lasts quite a while too, as to use it you just need 1 part cleaning solution and 40 parts water.

If you aren’t finding that this cleans enough then naturally, you can use it with more concentration instead. 

You should make sure that you buy the correct solution for what you want to clean though, as one solution is designed for cleaning the gun parts while the other is designed for cleaning the brass cases.

Pros

  • Effective
  • Can be used with a number of different gun cleaners
  • Long lasting

Cons

  • There are two solution options, and it can be easy to accidentally use the wrong one

Best Ultrasonic Gun Cleaning Solution Buying Guide

What Is an Ultrasonic Gun Cleaning Solution?

To put it simply, it’s a mix of a number of different powerful ingredients. They are combines together in such a way that it will make the perfect cleaning reaction whenever you put it around ultrasonic waves.

The solution is designed to lower the surface tension on the liquid, which in turns increases the cavitation effects from the liquid whenever an ultrasonic wave comes into contact with it. 

You need to use the solution by putting it in water to dilute it before you clean it.

Ultrasonic gun cleaning solutions are ideal because they are usually totally biodegradeable and safe to use. All you need to do is throw the remnants down the drain after use and you’re good to go.

Ultrasonic gun cleaning solutions are pretty effective, so long as you use them properly. You need to use them with an automatic gun cleaning machine, and this can help you to get even better results in a short amount of time. 

Ultrasonic Gun Cleaning Solution Types

As you may imagine, there are a wide range of ultrasonic cleaning solutions out there. There are three main types, though, and products are categorized based on their pH levels.

The main types of ultrasonic gun cleaning solutions are acidic cleaning solutions that have a pH less than 7, Alkaline or basic cleaning solutions that have a pH greater than 7, and neutral cleaning solutions that have a pH of 7.

For more rigorous cleaning tasks, acidic and alkaline cleaning solutions will be sufficient. If you need to do more gentle cleaning then you can use a neutral cleaning solution instead. 

It’s important that you choose the kind of cleaner that is going to best fit the cleaning job you wish to undertake. 

You will likely need different kinds of cleaning solutions for the brass and the gun parts, as they hold different kinds of contaminants. 

Testing

Before you use an ultrasonic gun cleaning solution, you should try to test it out first.

This will help to make sure that you don’t corrode or damage the finish on your gun. 

Explosion Proof and Non Flammable

There are a number of ultrasonic gun cleaning solutions on the market that are flammable.

If you are using these, you need to be incredibly careful. You should also try to use explosion proof ultrasonic cleaners. Safety is paramount, after all!

You will usually find that ultrasonic gun cleaning solutions that are made by reputable brands have been designed with these safety elements in mind.

Frequently Asked Questions

How do I clean my gun using ultrasonic gun cleaning solution?

Cleaning your gun is simple with ultrasonic gun cleaning solution! After a while you will create your own procedure for cleaning your guns with ultrasonic solution. Until then, here is a guideline for some of the main practices to follow.

First of all, check the capacity of your ultrasonic cleaner tank. You will need to get the correct amount of solution then. To do this, check the dilution recommendations set out by the manufacturer.

You will generally find that a lot of cleaners come with a ‘fill line’ marked on them. You should still make sure that you account for any solution displacement, as the levels will change based on the parts that you put in the solution. 

Once you have done this, you will then need to activate the ultrasound and degas function, which will mix and degas the ultrasonic gun cleaning solution. You need to turn off the unit once the solution has been mixed and degassed sufficiently. 

Take your gun apart, being careful to check the manufacturer’s instructions for how you do so. If you happen to find any contaminants that are loose, make sure that you get rid of them using a brush, to make sure that the cleaning solution stays effective.

Once you have done this, put all of the parts of the gun into the basket. You should make sure that you don’t crowd any of the parts. You will then need to turn the unit on and put the thermostat on 150 degrees Fahrenheit.

When you hear the ultrasound starting, simply lower the basket into the tank filled with solution. You need to set the timer for around 10 minutes. Once the timer has run out, just remove the basket and look over the parts without putting your hands into the solution, as it will be hot.

If you think that the parts are clean enough, simply shake them, wipe them over and let them dry off. You can then apply an ultrasonic firearm lubrication afterwards.

Once you have finished with the cleaning process, it is very important to ensure that you complete the right after care. Firstly, any contaminants that have risen to the surface of the tank will need to be skimmed off and then set to one side.

You will also need to get rid of the solution by draining the tank. Make sure that you get rid of any sludge that has made itself comfortable on the bottom of the tank, then thoroughly clean the tank off. Follow the cleaning instructions set out by the manufacturer to do this. 

What is the best ratio of water to cleaning solution?

Ultimately this depends on the kind of cleaning solution that you choose to use, and it also depends on what in specific you are trying to clean.

For instance, if you have bought one of the ultrasonic gun cleaning solutions mentioned in this article, then it is important that you adhere to the mixing ratio instruction provided by the manufacturer.

You can also check online for some solutions to see what kind of ratio other people are using, 

It is very important that you avoid using an undiluted solution to clean parts of the gun. This will be too aggressive and may end up damaging your gun. If a certain part of your gun is particularly dirty, just spend a little bit of extra time cleaning it. 

How do I make an ultrasonic gun cleaning solution at home?

You should always try to get an ultrasonic gun cleaning solution that’s made by a professional. With that being said, if you are on a budget it is entirely possible to make your own ultrasonic gun cleaning solution from the confines of your own four walls.

All you really need to do is mix together a soap powder or a detergent in some hot water.

Some other gun owners also use things such as kerosene, vinegar, alcohol and ammonia, but this isn’t the best choice is it may end up causing some damage to your nickel, brass, copper, aluminum and other metal finishes on your gun. 

You need to make sure that you create the solution carefully to avoid any damage. If you have any doubt, we really recommend getting a store bought ultrasonic gun cleaning solution instead.

How often do I need to change the ultrasonic gun cleaning solution?

It is imperative that you change your cleaning solution whenever you are finding that the parts of your gun are taking longer than usual to clean.

You should also change the solution when the parts aren’t getting as clean as they normally would with a clean load of solution, or when the solution looks a bit too contaminated.

You can tell if the solution is too contaminated as you may see some debris floating on the top, or you may not be able to see to the bottom of the tank. 

It should be noted though that you don’t need to use fresh solution every single time you are cleaning, You just need to keep an eye out for the signs that you do need to clean the tank.

Leave a Comment

Your email address will not be published. Required fields are marked *